Company Profile
Japan Rebuilt aims to be a company that contributes to the global environment as a new challenge while focusing on its core business.
Now that global warming is progressing rapidly, it is having a serious impact on the global environment. Reducing and stabilizing CO2 in the atmosphere and preventing global warming is a common challenge for humankind! For half a century since our founding, we have been rebuilding engines to meet the needs of the times, and rebuilding technology that began with the reuse of automotive functional parts. Now, it is being reviewed from a new perspective. Japan Rebuilt has a strong desire to prevent a large amount of CO2 emissions by recycling and utilizing these functional parts with the minimum amount of parts and maximum technology, rather than disposing of them. We are striving to engage in business activities that can contribute to the global environment of the present and the future.
Car culture needs to be nurtured, and it cannot develop if cars are disposable.
Through our corporate activities, we are working to solve social issues and contribute to the achievement of the SDGs. Toward the major theme of recycled parts, "global environmental protection", through the manufacturing, processing, and sales of rebuilt products that we have been working on since our founding, ahead of the era of recycling >< recycling, we have been working on since our founding. We hope to contribute to society by practicing what we can do for the environment one by one. In addition, in order to deliver reliable peace of mind and trust to users nationwide, we will concentrate our efforts to develop a system that can respond to various needs based on our many years of experience, develop technology, and provide low cost. In addition, we will continue to devote ourselves to it.
Company Overview
- Company Name
- Japan Rebuilt Corporation
- establishment
- September 1980
- Head Office
- 〒590-0151 Kodai 532-2, Minami-ku, Sakai-city, Osaka
TEL.072-294-7711 FAX.072-294-8811 - Capital
- 90,000,000 yen
- Representative Director
- Katsunori Tanaka
- Business Activities
-
- Manufacturing and sales of rebuilt automobile parts, including:
- Transmission Systems: AT, MT, CVT
- torque converter
- Power Steering Vane Pump
- Rack & Pinion (Hydraulic, Manual, Motor Controlled)
- Gearbox (hydraulic, manual)
- Steering column (motor control)
- Drive shaft (ASSY/CV joint)
- Engine & Cylinder Head
- alternator
- Starter motor
- Electric Power Sliding Door Motor
- Air Conditioner Compressor
- Catalytic converters, DPFs, SCRs
- Power Sliding Door Motor
- distributor
- Throttle Chamber
- carburetor
- Differential Gear
- Viscous Coupling
- Vapor Riser
- Supply Pump
- injector
- Hybrid Battery
Company Evolution
- 1970-March
- Founder Katsuhiro Tanaka opens an auto parts remanufacturing business in Sumiyoshi-ku, Osaka
- 1975-April
- Katsuhiro Tanaka Traveled to the U.S. alone and learned automatic transmission rebuilding technology
- 1976-January
- Started automatic transmission reconstruction business in Sumiyoshi-ku, Osaka City
- 1977-May
- Started rebuilt production of engine cylinder heads
- 1980-May
- Japan Rebuilt Co., Ltd. was established in Obaji, Minami-ku, Sakai City
- 1980-December
- Started rebuilt production of torque converters, the first non-disassembled parts in Japan.
- 1991-February
- Started power steering rebuilding business in Sumiyoshi Ward, Osaka City
- 1992-March
- Started drive shaft rebuilding business
- 1993-April
- Established a specialized production plant for drive shaft rebuilding in Obaji, Minami-ku, Sakai City.
- 1994-June
- Established a power steering rebuilt production plant in Obaji, Minami-ku, Sakai City
- 1994-June
- Started manual transmission rebuilding business
- 1994-August
- Started rebuilding business for automatic manual transfer
- 1998-April
- Establishment and relocation of automatic transmission business to a large-scale factory of 1,500 tsubo in Koshiro, Minami-ku, Sakai City
- 1998-August
- Established a new production line for drive shaft outer boards in Koshiro, Minami-ku, Sakai City.
- 1998-December
- Established a large-scale core center dedicated to automatic transmissions with a total of 1,500 tsubo in Kosaka, Minami-ku, Sakai City
- 1999-May
- Started a business to rebuild mini vehicle engines
- 1999-September
- Established a factory specializing in engine rebuilding in Obaji, Minami-ku, Sakai City, and expanded business to the 2-ton class of ordinary cars
- 2000-April
- Established a new drive shaft production line factory in Koshiro, Minami-ku, Sakai City. Started production of new drive shafts
- 2001-June
- Electrical Equipment Division established in Obaji, Minami-ku, Sakai City, and started rebuilt production of alternators and starters
- 2001-September
- Established a sales headquarters in Koshiro, Minami-ku, Sakai City, and consolidated into a single order center
- 2002-March
- Started digital meter rebuilding business
- 2004-October
- Established a large-scale production plant of 2,500 tsubo in Bachika-cho, Kishiwada City.
- 2004-October
- The Engine Division was relocated to the Kishiwada Plant, and a large tester room was established
- 2005-June
- Electrical Components Division relocated to Kishiwada Plant, rebuilt production of cooler compressors started
- 2005-June
-
The Ministry of Economy, Trade and Industry recognizes the rebuilding of used parts and receives the Clean Japan Center Chairman's Award at the Resource Recycling Technology and System Award - 2005-July
- Started CVT Mission Rebuild Business
- 2006-April
- Achieved ISO 9001 (Quality) and 14001 (Environmental) certifications.
- 2006-December
- Certified by Osaka Prefecture as a company approved by the management innovation plan
- 2007-February
- Started throttle chamber rebuilding business
- 2007-April
- Started distributor rebuilding business
- 2007-June
- Started the rebuilding business of paper risers
- 2007-December
- Power Steering Division relocated to Kishiwada Plant Introduction of new rack and pinion testers
- 2008-February
- Started differential rebuilding business
- 2008-October
- Established a large-scale distribution center of 3,000 tsubo in Sekikawa-cho, Kishiwada City.
- 2011-February
- Established a large-scale production line for cooler compressors in Oiwaji, Minami-ku, Sakai City
- 2011-January
- Started catalyst rebuilding business
- 2011-March
- Introduction of an automation tester machine for power steering pumps to the Kishiwada Plant
- 2011-April
- Introduction of EPS (Electric Power Steering) Automation Tester to Kishiwada Plant
- 2011-May
- Introduction of an automation tester machine for large gearboxes to the Kishiwada Plant
- 2011-November
- Started rebuilding business for viscous couplings
- 2012-March
- In conjunction with the electronic control of AT missions, a tester machine with a built-in mission computer was introduced to the Koshiro Plant
- 2013-March
- Introduction of CVT mission tester machine (with built-in mission computer) to Kishiwada Plant
- 2013-July
- Introduction of manual mission tester machine (compatible with Smoother Mission) to Kishiwada Plant
- 2014-March
- Started rebuilding the rear side of the drive shaft exclusively for FR
- 2014-May
- Introduction of mission valve body & solenoid valve stand-alone tester machine
- 2015-December
- Started power sliding door motor rebuilding business
- 2016-January
-
Construction of an electrical component testing room at the Kishiwada Plant
Introduction of automation tester machine for dynamo starter motors - 2016-March
- Introduced the Japan Rebuilt Product Search System on the web.
- 2017-February
- Establishment of Takao Plant
- 2018-May
- Started SCR filter rebuild business
- 2019-December
- Started the DCT mission rebuild business
- 2020-May
- Started the hybrid battery rebuild business
- 2023-January
- Katsunori Tanaka has been appointed as the President and CEO
Branch Office
Head Office Department

Head Office Department
Location: 〒590-0151 Kodai 532-2, Minami-ku, Sakai-city, Osaka TEL:072-294-7711FAX:072-294-8811
Kodai Factory

Kodai Factory
Location: 〒590-0151 Kodai 532-2, Minami-ku, Sakai-city, Osaka TEL:072-294-7711FAX:072-294-8811
Takao Plant

Takao Plant
Location: 〒590-0157 3303-2 Takao, Minami-ku, Sakai City, Osaka Prefecture TEL:072-271-3008FAX:072-271-3009
Kishiwada Plant

Kishiwada Plant
Location: 〒596-0101 91 Bachika-cho, Kishiwada-shi, Osaka TEL:0724-48-7711FAX:0724-48-7700
Kishiwada Core Center

Kishiwada Core Center
Location: 〒596-0104 610-5 Sekikawa-cho, Kishiwada-shi, Osaka TEL:0724-89-3312FAX:0724-89-3310
Tochigi Office

Tochigi Office
Location: 〒322-0603 1196-2 Hongo, Nishi-cho, Tochigi-shi TEL:0282-92-0698FAX:0282-92-0766
Sapporo Office

Sapporo Office
Location: 〒007-0812 Higashi-naeho, Higashi-ku, Sapporo City 12-jo 4-12-1 TEL:011-791-7995FAX:011-791-8995
Okinawa Distribution Center

Okinawa Distribution Center
Location: 〒901-0306 4-21-3 Nishizaki-cho, Itoman-shi, Okinawa